Why we don't have required plans the required hull shape. with almost every other sailboat class, the way it works is you buy a set of plans that the class sells, and then build that exact boat (or buy one).. Fast-g stitch and glue plywood. this quick and easy boatbuilding method consists of plywood planking panels cut to shape from full-size patterns which are “stitched” and “glued” together at the seams.. Plans for small portable boats. the 1 sheet wedge - it may look like some of my other wedge designs, but it differs in one important aspect; the basic hull is constructed primarily from one sheet of 1/4 inch plywood.at 8' x 2.5' x 1.25' and 30 pounds, it is an ultra simple 2 module design, with all straight lines, that is easy to build and operate by a single occupant..
Power 1: 16’x5’6’’ ply motor launch of ultra simple construction using pre-shaped ply hull panels, frames and transom. the chine joints are completed with epoxy resin fillets and tape making construction quick.. Hull type: tunnel hull with full length sponsons developed for sheet plywood planking. power: long shaft outboard motor to 140 hp. can the hull be extended or shortened? no. we also do not recommend increasing the beam. trailer: designed for use with glen-l series 1000 boat trailer plans. tunnel. Introduction if you have not worked with glen-l poxy-shield epoxy resins, or you have applied fiberglass before using polyester resins, make sure you read and understand all of the following information before starting any aspect of the job or handling any materials..
